slice1 slice2
slice2 slice2 slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2 slice2 slice2
slice2 slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2 slice2
slice2 slice2
slice2 slice2
slice2 slice2



 

According to the American Lung Association, in excess of 40% of American households have at least one person suffering from asthma or allergies making the quality of indoor air crucial to their good health. Properly insulating a home can have a positive impact on the quality of the indoor air.

With the focus on improving building standards, each step in the process is being scrutinized and improved – especially the insulation process. Demilec (USA) is well ahead on the technology curve when it comes to improving indoor air quality.

SEALECTION® 500 and SEALECTION Agribalance® are environmentally safe and non-toxic products that completely air seal a building. Combined with proper mechanical ventilation, they are the answer to improving indoor air quality and creating a healthy, clean environment.

By sealing out dust, allergens, odors and pollutants Demilec (USA) spray foam insulations allow the air management system to be designed so that the indoor air quality is healthier than outside air.

Shouldn't your home be a safe haven for your family? Ask about an Authorized Contractor near you to learn more about how you can protect your family.

Relevant News Articles
Sick Building Syndrome ("SBS") is a situation in which occupants of a building experience acute health effects that seem to be linked to time spent in a building. While specific causes of SBS remain unknown, the following have been cited as contributing factors to sick building syndrome:

Chemical contaminants from outdoor sources
Chemical contaminants from indoor sources

Sizing of HVAC
It is generally accepted that "the right way" to specify an air conditioning system is to calculate the loads and select a piece of equipment that will provide comfort to the customer in a wide variety of conditions. Unfortunately, this is rarely practiced.

Since optimum efficiency is achieved at continuous running, it is important that the air conditioner be sized to achieve the longest run times possible. Standard sizing calculations are based on a design temperature that is exceeded only 7 hours in a normal cooling season. An air conditioner sized to run continuously at design conditions will cost less initially and will have a lower operating cost due to its longer run times.

 
© 2008 Indiana Spray Foam, LLC All Rights Reserved